Motorola Astro APX 6000Li Series User Manual - Page 23

Browse online or download pdf User Manual for Portable Radio Motorola Astro APX 6000Li Series. Motorola Astro APX 6000Li Series 45 pages. Digital portable radios
Also for Motorola Astro APX 6000Li Series: Quick Reference Manual (48 pages), Quick Reference Manual (48 pages), Quick Reference Card (2 pages), Quick Reference Card (2 pages), Quick Reference Card (2 pages)

Print Page

5. Ensure that the plug's and jack's interlocking features are fully seated.

Check this by grasping the crimp on the cable jack, rotating the cable, and

noting any movement. If the features are seated correctly, there should be

NO movement.

6. Finger-tighten the antenna cable plug's collar onto the APX VA's jack.

7. Give a final tug, by hand, to the collar, and retighten by hand as firmly as

possible.

Note: Do not use pliers or any other device to grip the tightening tool. It has

been designed to allow you to achieve proper torque on the collar

without over tightening. Over tightening the collar can damage the

connector and the APX VA.

Console Cabling

Refer to Figure 7 and Figure 8 before routing or connecting any console cable.

The console should be cabled using the following procedure:

•

Note: 1. Due to space restrictions, it may be necessary to remove the console

before making connections to the connectors at the back of the

console. If this is the case, make all connections and remount the

console before replacing the 5-amp fuses.

2. For applications where the mounting structure of the console is

hinged (for example, swing cab), make sure to provide sufficient

service length for cables.

Speaker and

Interface

Connector (J1)

Supply

Connector (J2)

This product is designed for a 12-volt, negative-ground

system.

Remove the 5-amp fuses from the power cable (red and

yellow wires) before proceeding.

Figure 7: Console Connections

Microphone Connector (J4)

Antenna Connector (J3)