acumed Stableloc External Fixation System Surgical Technique - Page 6

Browse online or download pdf Surgical Technique for Medical Equipment acumed Stableloc External Fixation System. acumed Stableloc External Fixation System 8 pages.

Print Page
Acumed® Stableloc External Fixation System Surgical Technique
6
1
8
FLEXION/EXTENSION
To achieve the desired angle of wrist flexion:
Loosen the ball joint (1), adjust to the flexion
desired, then lock the ball joint.
9
POST-OPERATIVE PROTOCOL
After completion of all adjustments, the Stableloc
External Fixator is locked into its final position.
Wounds are dressed based on surgeon preference and dry
sterile gauze is recommended to be wrapped around the
Fixator Pins to prevent pistoning of Fixator Pins and soft tissue.
The Stableloc Soc (FX-4005) can then be applied to facilitate
patient acceptance of the Stableloc External Fixator device.
Note:
The Stableloc Hex Driver (FX-4003) may be used
for in-office adjustments, and the Stableloc Pin Driver
(FX-4008) may be used for pin removal at the appropriate
time. Please save these parts from your sterile procedure
pack and utilize the appropriate Instructions for Use for
sterilization parameters.