Philips X Line 49BDL2005X/00 User Manual - Page 13

Browse online or download pdf User Manual for Monitor Philips X Line 49BDL2005X/00. Philips X Line 49BDL2005X/00 49 pages.

Print Page

49BDL2005X

1.4.

Mounting on a Wall

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you

use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America.

1. Spread a protective sheet which was wrapped around the display when it was packed on a flat surface. Lay the display face-

down on the protective sheet to facilitate your operation without scratching the screen.

2. Ensure that you have all accessories necessary for any type of mounting (wall-mounting, ceiling mounting etc).

3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in

damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper

installation.

4. For the wall-mounting kit, use M6 mounting screws (with a length 10 mm longer than the thickness of the mounting bracket)

and tighten them securely.

1.4.1. VESA Grid

49BDL2005X

Caution:

To prevent the display from falling:

•

For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially

available. For detailed instructions about the installation, refer to the guide that come with the bracket.

•

To prevent the display from falling in case of earthquake or other natural disaster, please contact the manufacturer of the

bracket for the mounting location.

Required space for ventilation

Leave a space of 100 mm at the top, rear, right and left for ventilation.

Table

400(H) x 400(V) mm

Protective Sheet

100 mm