MSI G Series User Manual - Page 18

Browse online or download pdf User Manual for Monitor MSI G Series. MSI G Series 23 pages.
Also for MSI G Series: User Manual (37 pages), User Manual (33 pages), User Manual (35 pages), User Manual (28 pages), User Manual (28 pages), User Manual (31 pages), User Manual (26 pages), User Manual (35 pages), User Manual (26 pages), User Manual (31 pages), User Manual (34 pages), User Manual (26 pages), User Manual (33 pages), User Manual (28 pages), User Manual (26 pages), User Manual (25 pages), User Manual (34 pages), User Manual (26 pages), User Manual (27 pages), User Manual (27 pages), User Manual (25 pages), User Manual (25 pages), User Manual (33 pages), User Manual (32 pages), User Manual (27 pages), User Manual (26 pages), User Manual (26 pages), User Manual (31 pages), User Manual (27 pages), User Manual (27 pages), User Manual (25 pages)

Print Page

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.

∙ All cautions and warnings on the device or User Guide should be noted.

∙ Refer servicing to qualified personnel only.

Power

∙ Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

∙ If the power cord comes with a 3-pin plug, do not disable the protective earth pin

from the plug. The device must be connected to an earthed mains socket-outlet.

∙ Please confirm the power distribution system in the installation site shall provide

the circuit breaker rated 120/240V, 20A (maximum).

∙ Always disconnect the power cord or switch the wall socket off if the device would

be left unused for a certain time to achieve zero energy consumption.

∙ Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙ If this device comes with an adapter, use only the MSI provided AC adapter approved

for use with this device.

Environment

∙ To reduce the possibility of heat-related injuries or of overheating the device, do not

place the device on a soft, unsteady surface or obstruct its air ventilators.

∙ Use this device only on a hard, flat and steady surface.

∙ To prevent the device from tipping over, secure the device to a desk, wall or fixed

object with an anti-tip fastener that helps to properly support the device and keep it

safe in place.

∙ To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙ Do not leave the device in an unconditioned environment with a storage temperature

above 60℃ or below -20℃, which may damage the device.

∙ The maximum operating temperature is around 40℃.

∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into

the opening; that could damage the device or cause electric shock.

∙ Always keep strong magnetic or electrical objects away from the device.