Aries Embedded RISC-V on MAX10 User Manual - Page 8

Browse online or download pdf User Manual for Computer Hardware Aries Embedded RISC-V on MAX10. Aries Embedded RISC-V on MAX10 20 pages.

Print Page
RISC-V on MAX10 User Guide

3.1 MAX10 SoMs

To run the RISC-V demos on a MAX10 board one of the following SoMs is required:
• SpiderSoM-S (10M08SAU169C8G)
• MX10-S8 (10M08DAF256C8G)
• MX10-U (10M50DAF256I7G)
To compile the firmware the RISC-V GCC toolchain is required.
To build the hardware design
To programm the image on the board either a JTAG USB-Blaster (with Quartus Programmer) or OpenOCD
is required.
As reference for this guide Linux Ubuntu 20.04 is used, other Linux distributions may work similarly. While
the toolchain can be used on Windows only limited support is available.

3.2 Reference Designs

The first step is to to download the reference designs using git. Open a terminal window to clone the
repository with the command:
git clone https://github.com/ARIES-Embedded/riscv-on-max10
Chapter 3. Requirements
Intel Quartus Prime
is required.
CHAPTER
THREE

REQUIREMENTS

Page 8 of 20