3Com Etherlink 3C905B-TX Quick Manual - Page 6
Browse online or download pdf Quick Manual for Network Card 3Com Etherlink 3C905B-TX. 3Com Etherlink 3C905B-TX 12 pages. Etherlink pci network interface cards
Also for 3Com Etherlink 3C905B-TX: Quick Manual (12 pages), Quick Manual (15 pages)
Print Page
aats
er
Fee?
7 Secure the NIC with the screw you removed in step 5.
lf you want to connect the Remote Wake-Up cable, see
"Connecting the Remote Wake-Up Cable" in the user guide
to continue the installation. If you do not want to connect
the cable, continue with step 8.
8 Replace the PC cover and plug in the power cord.
Do not turn on the power to the PC.
The next step is to connect the NIC to the network.
Connecting the NIC to the Network
Port
RJ-45
AUl
BNC
SC
ST
Connect the appropriate network cable to the port on the
NIC, following the specifications in the table below.
Network
Maximum
Environment
Cable Required
Cable Length
100 Mbps
Category 5 unshielded
100 m (328 ft)
(100BASE-TX)
__ twisted-pair
10 Mbps
Category 3, 4, or 5
100 m (328 ft)
(10BASE-T)
unshielded twisted-pair
10 Mbps
10BASES thick Ethernet
500 m (1,640 ft)
(10BASE5)
coaxial (10 Mbps only)
10 Mbps
1OBASE2 thin Ethernet coaxial
185 m (607 ft)
(10BASE2)
(10 Mbps only)
100 Mbps
Long-wavelength fiber-optic
Full-duplex: 2,000 m
(1OOBASE-FX)
= (1300 nm): 50 p/125 u or
(6,560 ft )
62.5 p/125 w multimode fiber Half-duplex: 412 m
(1,351 ft)
10 Mbps
Short-wavelength fiber-optic
Full-duplex: 2,000 m
(JOBASE-FL)
= (850nm):50y/125por
—- (6,560 ft)
62.5 w/125 » multimode fiber Half-duplex: 412 m
(1,351 ft)
For detailed instructions, see the user guide.
The next step is to install the network driver.