Xerox 2000 Series Operation Manual - Page 20

Browse online or download pdf Operation Manual for Printer Xerox 2000 Series. Xerox 2000 Series 36 pages. 2000 series nps/ips extension operations guide

Print Page

Product overview

Operating system software

Network Printer Series (NPS) and IPDS Printing System (IPS) overview

1-2

The NPS/IPS Extension consists of two components that are

easily added to your printing system:

•

Hardware: An external fixed disk drive

•

Software: NPS/IPS 8.0 operating system software

You can switch between print modes by performing a few simple

steps. This procedure is described in chapter 3, "Changing print

modes."

The DocuPrint 2000 Series 100/115/135/155/180 EPS operates

from the standard internal fixed disk drive, and the EPS software

release level must be 2.10.00 or higher. The DocuPrint NPS/IPS

operates from an external fixed disk drive, and the NPS/IPS

software level must be 7.4.1 or higher.

The DocuPrint NPS/IPS enables personal computer (PC), Sun

workstation, DEC workstation, HP/Apollo, IBM RS/6000, and

Apple Macintosh users to print PostScript level 2, HP PCL5e, or

ASCII documents. These documents are then submitted to the

printing system over a network connection.

The system also enables IBM hosts running appropriate levels of

PSF to print IPDS data. The NPS/IPS emulates an IBM AFP

Group 3 Page Printer with the Advanced Function Image and

Graphics (AFIG) option.

The DocuPrint NPS/IPS can receive data at 240 or 300 dpi and

full-page IOCA images at 600 dpi. The system can also use 600

dpi fonts. All 240 or 300 dpi resources are interpolated to 600 dpi

by the printing system for higher print quality.

For more detailed DocuPrint NPS/IPS product information, refer

to the DocuPrint NPS/IPS System Overview Guide.

NPS/IPS Extension Operations Guide