Xerox M123 WorkCentre Reference Manual - Page 7

Browse online or download pdf Reference Manual for Printer Accessories Xerox M123 WorkCentre. Xerox M123 WorkCentre 20 pages. Stand installation guide
Also for Xerox M123 WorkCentre: Installation Manual (2 pages), Evaluator Manual (12 pages), Brochure & Specs (6 pages), Install Manual (2 pages), Network Manual (50 pages), Scan Manual (28 pages), Quick Installation Card (2 pages), Manual (28 pages), Office Finisher Installation Manual (6 pages), Office Finisher Installation Manual (6 pages), Hardware Installation Manual (4 pages), High Capacity Tray Installation Manual (3 pages), High Capacity Tray Installation Manual (3 pages), Hard Drive Kit Installation Manual (2 pages), Inverter Installation Manual (2 pages), Installation Manual (2 pages), Hardware Installation Manual (2 pages), Stand Installation Manual (2 pages), Quick Network Setup Manual (7 pages), Service Manual (22 pages)

Print Page
Xerox M123 WorkCentre Reference Manual
Feature
Process Color
<</ProcessColorModel name >>
Model
setpagedevice
Separations
<</Separations value >>
setpagedevice
Separation
<</SeparationColorNames
Color Names
value>>
setpagedevice
Separation
<</SeparationOrder value>>
Order
setpagedevice
Use CIE Color
<</UseCIEColor value>>
setpagedevice
These features use PJL commands as described in "PCL/PJL Implementation."
Job Name
Refer to that section for information about these features.
Job Type
Accounting
Delay Print
WorkCentre M128/M123 Reference Guide
Implementation
Values
Where name is one of the following:
/DeviceGray
/DeviceRGB (with Separations true)
/DeviceCMYK (with Separations true)
/DeviceCMY (with Separations true)
/DeviceRGBK (with Separations true)
Where value is one of the following:
true = Multiple color separations will be
generated for each page of output.
false* = All colorants will be combined into a
single composite page on a single
sheet of physical medium.
Where value is an array.
Legal element values are the process
colorant names implied by the process
color model.
Valid colorant names for each process
color model are like the following in case
of separation
DeviceCMYK = Cyan, Magenta, Yellow,
Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
Where value is an array.
Legal element values are the process
colorant names implied by the process color
model.
Where value is one of the following:
true = Re-map each color from device
color space to device
independent's CIE- based color
space
false* = Do not re-map color
Page
7
dc05cc0364