Alderon Industries Big Switch Pump Control Operation, Maintenance And Installation Manual - Page 2

Browse online or download pdf Operation, Maintenance And Installation Manual for Control Unit Alderon Industries Big Switch Pump Control. Alderon Industries Big Switch Pump Control 2 pages.

Print Page
Float Cable Attachments |
Stainless Steel Pipe Clamp, RubberLox™ Pipe Clamp,
Cast Iron Cable Weight, and Plastic Cable Weight
Stainless Steel Pipe Clamp
(Fig. 1)
1C
1A
1B
RubberLox
Pipe Clamp
™
Cast Iron Cable Weight
(Fig. 1)
1A
Outside Halves
(front/back)
1B
Inside Halves
(front/back)
Plastic Cable Weight
(Fig. 1)
(lift)
(slide)
IOM000025B_Float Cable Attachments | March 23, 2020 4:52 PM
Alderon Industries, LLC - Leading Edge Control Products | 218.483.3034 | [email protected] | alderonind.com
Quick Start Guides
Scan for full product details
(Fig. 2)
Control Switches (Narrow Angle)
Minimum recommended tether length is 3.5 inches
Pump Switches (Wide Angle)
2B
Minimum recommended tether length is 3.5 inches
2A
2C
Tether Length
(Fig. 1)
Cable Placement Area
(Fig. 2)
Control Switches
(Narrow Angle)
Minimum recommended tether
length is 6 inches
Pump Switches
(Wide Angle)
Minimum recommended tether
length is 6 inches
(*) Correct installation position
example, narrow end up.
Scan for full product details
(Fig. 2)
Control Switches (Narrow Angle)
Minimum recommended tether length is 3.5 inches
Pump Switches (Wide Angle)
Minimum recommended tether length is 3.5 inches
Tether
Length
(Fig. 3)
(Fig. 2)
Control Switches (Narrow Angle)
Minimum recommended tether length is 3.5 inches
Pump Switches (Wide Angle)
Minimum recommended tether length is 3.5 inches
Tether
Length
(Fig. 3)
Control Switch
Tether
"High Alarm"
Length
Pump Switch
(Fig. 3)
3rd Notch = 18 AWG
2nd Notch = 16 AWG
1st Notch = 14 AWG
Tabs on cable clip
clicks into notch
(Fig. 4)
(Fig. 3)
(Fig. 4)
Activation Level
(Fig. 4)
FLOAT TREE