ALDI FERREX 704518 User Manual - Page 15

Browse online or download pdf User Manual for Saw ALDI FERREX 704518. ALDI FERREX 704518 20 pages. 1010w

Print Page

General maintenance

Your power tool requires no additional lubrication or maintenance. There

are no user serviceable parts in your belt sander. Never use water or

chemical cleaners to clean your belt sander. Wipe clean with a dry cloth.

Always store your belt sander in a dry place. Keep the motor ventilation

slots clean. Keep all working controls free of dust. Occasionally you

may see sparks through the ventilation slots. This is normal and will not

damage your belt sander.

If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

Carbon brushes

When the carbon brushes wear out, the belt sander will spark and/or

stop. Discontinue use as soon as this happens. They should be replaced

prior to recommencing use of the belt sander. Carbon brushes are a

wearing component of the belt sander, and are not covered under

warranty. Continuing to use the belt sander when carbon brushes need

to be replaced may cause permanent damage to the belt sander. Carbon

brushes will wear out after many uses but when the carbon brushes need

to be replaced, take the belt sander to a service agent for a quick and low

cost replacement. Always replace both carbon brushes at the same time.

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All

tools, hoses and packaging should be sorted, taken to the local recycling

centre and disposed of in an environmentally safe way.

Your new FERREX® 1010W Belt Sander will more than satisfy your expectations.

It has been manufactured under stringent FERREX® Quality Standards to meet

superior performance criteria.

You will find your new FERREX® 1010W Belt Sander easy and safe to operate,

and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire instruction manual before using

AFTER SALES SUPPORT

1300 889 028

(toll free)

1010W Belt Sander

MODEL No.: PBS101.A • 02/2021 • 704518