Zanussi ZSLN1211 User Manual - Page 20
Browse online or download pdf User Manual for Dishwasher Zanussi ZSLN1211. Zanussi ZSLN1211 28 pages.
Also for Zanussi ZSLN1211: User Manual (21 pages)
Print Page
4. To install the spray arm back, insert the
mounting element in the spray arm and
fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
12. TROUBLESHOOTING
WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
The majority of problems that can occur
can be solved without the need to contact
an Authorised Service Centre.
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
The appliance does not fill with water.
•
The indicator
flashes 1 time intermit‐
tently.
•
Acoustic signal sounds 1 time intermittently.
The appliance does not drain the water.
•
The indicator
flashes 2 times intermit‐
tently.
•
Acoustic signal sounds 2 times intermittent‐
ly.
20
ENGLISH
Refer to the below table for information on
possible problems.
With some problems, the dedicated indicator
flashes intermittently to indicate a malfunction
and the alarm code.
Possible cause and solution
•
Make sure that the mains plug is connected to the mains
socket.
•
Make sure that there is no damaged fuse in the fuse box.
•
Make sure that the appliance door is closed.
•
If the delay start is set, cancel the setting or wait for the
end of the countdown.
•
The appliance recharges the resin inside the water soften‐
er. The duration of the procedure is approximately 5 mi‐
nutes.
•
Make sure that the water tap is open.
•
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
•
Make sure that the water tap is not clogged.
•
Make sure that the filter in the inlet hose is not clogged.
•
Make sure that the inlet hose has no kinks or bends.
•
Make sure that the sink spigot is not clogged.
•
Make sure that the interior filter system is not clogged.
•
Make sure that the drain hose has no kinks or bends.