Zanussi ZCG43210WA User Manual - Page 21
Browse online or download pdf User Manual for Cookers Zanussi ZCG43210WA. Zanussi ZCG43210WA 28 pages.
Print Page
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quickly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The appliance makes noises.
The display shows "12.00".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
WARNING!
Refer to Safety chapters.
Technical data
Dimensions
Height
Width
www.zanussi.com
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The lamp is defective.
The temperature is too low or too
high.
You left the dish in the oven for
too long.
There was a power cut.
We recommend that you write the data here:
894 - 912 mm
550 mm
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Replace the lamp.
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
Reset the clock.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Dimensions
Depth
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the minimal distances of fitting check the
table.
Remedy
600 mm
21