Alemite 7836-A Service Manual - Page 7

Browse online or download pdf Service Manual for Control Unit Alemite 7836-A. Alemite 7836-A 8 pages.

Print Page

Control Valve

Test

WARNING

Do not exceed the lowest pressure rating

of any component in the system.

Never point a control valve at any portion of your

body or another person. Material discharged at

high velocity can penetrate the skin and cause

severe injury. Should any material appear to punc-

ture the skin, get medical care immediately.

Ensure all components are in operable condition.

Replace any suspect parts prior to operation.

Should leakage occur anywhere within the system,

disconnect power to the pump. Personal injury

can occur.

Alemite LLC

1-800-548-1191 - http://www.partdeal.com - [email protected]

NOTE: Apply air pressure to allow the

pump to begin to cycle. Slowly increase the

air pressure to achieve the desired material

pressure.

1. Point the control valve into an appropriate collection

container.

2. Pull the control valve Handle and allow the material to

flow until it is free of air.

If the control valve does not dispense the product, refer

to the Troubleshooting Chart.

3. Release the Handle.

• The control valve should show no external leakage

and no product should appear at the Nozzle.

If the valve leaks, refer to the Troubleshooting Chart.

SER 7836-A

Revision (1-13)