Nikon TIRF Instructions Manual - Page 30

Browse online or download pdf Instructions Manual for Digital Camera Nikon TIRF. Nikon TIRF 37 pages. System for te2000

Print Page

Replacing the objective and the filter block

Before replacing the objective and the filter block, make sure that all lasers are off.

See the instruction manual of the microscope you use for information on how to replace the objective

or filter block.

Do not remove the objectives when the laser is on.

Never attempt to remove the objectives from the microscope when the laser is on.Removing

the objectives may cause the laser beam to be emitted through the sockets on the nosepiece,

resulting in exposure of the eyes or skin to the laser.

The following tasks are to be handled by trained service personnel. Any attempt by unauthorized

staff to perform these tasks during transfer or relocation of the system may result in exposure of the

eyes or skin to laser beams, or degrade system performance. If you need to move or relocate the

system, please contact your dealer.

• Detach the laser from the laser unit.

• Detach the optical-fiber cable from the laser unit.

• Detach the optical-fiber cable from the TIRF attachment.

• Detach the TIRF attachment from the microscope.

When cleaning optical components, use a soft, clean cotton cloth, lens tissue, or gauze lightly

dampened with absolute alcohol (ethyl or methyl alcohol) to gently wipe off dirt or marks.

In particular, carefully check for marks on the tip of the objective and the cover glass. Marks on these

sections can substantially reduce contrast during TIRF observation.

III

Maintenance

Replacing the objective and the filter block

- 28 -