Discount Car Stereo BLU-C5 Nstallation Instructions - Page 2

Browse online or download pdf Nstallation Instructions for Receiver Discount Car Stereo BLU-C5. Discount Car Stereo BLU-C5 12 pages. Music streaming module for seelect 1997-04 corvette
Also for Discount Car Stereo BLU-C5: Installation Manual (9 pages), Installation Instructions Manual (12 pages), Installation Manual (10 pages), Installation Manual (8 pages), Installation Manual (12 pages)

Print Page
Discount Car Stereo BLU-C5 Nstallation Instructions
Introduction
The BLU-C5 module, adds music streaming capabilities to all C5 with original
Theftlock radios (Bose or non-Bose). User decide if to install module behind the
radio or (when available) to 10-pin plug in trunk/hatch. Optional 12-disc changer
must be disconnected or purchase our
installed, pair smartphone, tablet etc. to stream Apple music, navigation, Spotify,
XM radio, Pandora, audio books or other applications while on the way to work or
cruising around town.
Note: The BLU-C5 does not interfere with existing radio operation; however,
optional 12-disc changer (if present); must be disconnected.
Go to frequently asked question page at the end of this guide.
Installation 1: (
To radio with PXHGM4 harness
With the PXHGM4 harness, the module connects to car behind
radio cavity. With the PXHGM2 harness, the module connects to
car at 10-pin plug in trunk/hatch (proceed to page 4).
The 12-disc changer (if present) must be disconnected.
Purchase our
A2D-C5
Click links below for radio removal video)
Radio removal required. (
https://www.youtube.com/watch?v=Gcrlufo1ctc
https://www.youtube.com/watch?v=WTbWYNJTSDs
1.
Locate factory 20-pin plug. Press black release tab to disconnect from
radio (See Fig. 1)
A2D-C5
to retain changer. Once
)
to retain CD changer playback.
Fig. 1
2. Connect factory 20-pin plug (from step 1), to matting connector (white)
on installation harness (See Fig. 2).
Fig. 2
PXHGM4 installation harness
3. Connect installation harness 20-pin black/gray plug (See Fig. 2) to
radio 20-pin connector vacated in step 1
4. Ensure module dip-switches #3 and #8 are "ON" or down (See Fig. 3)
Fig. 3
5. Connect installation harness 22-pin Molex plug (See Fig. 2) to module
22-pin Molex connector (See Fig. 4)
Fig. 4