3D AEROWORKS TRACER 2000 Assembly Manual And User Manual - Page 12

Browse online or download pdf Assembly Manual And User Manual for Aircrafts 3D AEROWORKS TRACER 2000. 3D AEROWORKS TRACER 2000 19 pages. Thermal glider

Print Page

Install the tail boom to the rear of the fuse. There is an optional small hole in the aft of the

fuse for a M2x20mm screw to secure the tail boom to the fuse, otherwise the tail boom can

be glued in place. Be sure to confirm the v-tail is level with the fuse before fixing the tail in

place.

Place tape at the end of each elevator to hold it level while connecting the fishing line to the

elevator. It is advised that the servo's be centered and programmed before connecting the

control lines. Place a drop of CA on the knot to secure it. The knot should be firm and not

overly tight, if it is too tight you risk adjusting the angle of the tail-plane which could lead to

adverse flying characteristics.