ARO RS26A–VLK Operator's Manual - Page 3
Browse online or download pdf Operator's Manual for Sander ARO RS26A–VLK. ARO RS26A–VLK 8 pages. Random orbital sanders 12,000 r. p. m.
LUBRICATION
ARO Part #
Where Used
''O" Rings & Lip Seals
Gears and Bearings
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–
Regulator Unit:
ARO Model P29231–110 plus 100067 Gauge
After each 160 hours of operation, inject one or two
strokes of ARO Part #33153 grease through the end of
the spindle (27) to lubricate the needle bearing which is
in the end of the counterbalance (26).
Description
36460
4 oz. Stringy
Lubricant
33153
5 lb. ''EP" – NLGI
#1 Grease
Do not mark any nonmetallic surface on this tool
with customer identification codes. Such actions
could affect tool performance.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)