3D Hobby Shop 59" AJ Slick Installation Manual - Page 13
Browse online or download pdf Installation Manual for Aircrafts 3D Hobby Shop 59" AJ Slick. 3D Hobby Shop 59" AJ Slick 20 pages.
Print Page13
Install the pushrod connectors onto the servo arms as shown. Tighten the nuts just to a snug fit – the
connector must be able to rotate after installation. Use medium or thick CA glue on the nut to keep
the connector from falling off due to vibration. Remember – the pushrod connector must be able to
rotate so that the servo arm can move.
Install elevator servo extension onto elevator servo, and install elevator servo into fuselage as shown.