Abble 300568 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Indoor Furnishing Abble 300568. Abble 300568 2 pages. 5 ft. green lighted flocked spruce artificial christmas tree

Print Page

PRE-LIT TREE ASSEMBLY INSTRUCTIONS:

1. Follow the stand assembly instructions to set up the tree stand.

a. Pull apart the legs of the stand so that they are X-shaped.

b. Screw the eye bolts through the hole of metal tabs. Turn screws so

they touch tree trunk. Stand tree up and straighten by adjusting

screws in or out then tighten screws.

2. Set section B to stand. Take all the hinged branches to unfold into

place. (See Fig. 1)

3. Shape the branches on the bottom section of your tree. Note that some

tree models have "side branches" attached to the main branch stem

that require additional shaping.

4. Insert tree top A into the hole (pole cap) on the top of the trunk of

section B.(See Fig.2) Take all the branches to be shaped.

Connect the plug (A1) on the light set on the tree top section into the

end-plug (B1) of the strings of section B. Shape the branches on the

tree top section.

5. After shaping the whole tree following the previous steps, step back

and take an overall look at the tree. Shift branches as necessary to fill

any gaps.

6. Now you can plug the B2 to a standard power outlet to perform the

tree for decoration.

Fig. 3

Fig. 4

USE AND CARE INSTRUCTIONS:

Before using or reusing, inspect product carefully. Discard any products that

have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders,

loose connections, or exposed copper wire.

Before storing the product, carefully remove the product from wherever it is

placed to avoid any undue strain or stress on the product conductors,

connections, and wires.

When not in use, store neatly in a cool, dry location protected from sunlight.

side branches

side view

Fig. 5

2/4

Fig. 2

Fig. 1

Eye Bolts

To Power Supply

3/4