AERF WIRELESSBAND 1.3 SLIM Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Receiver AERF WIRELESSBAND 1.3 SLIM. AERF WIRELESSBAND 1.3 SLIM 4 pages.

GB
CODE MEMORIZATION TRANSMITTER 1 FOR CHANNEL 1 & TRANSMITTER 2 FOR CHANNEL 2 (DIP-SWITCH 5 - ON)
1.5s
PROG.
PRESS
1 X
RECEIVER
BEEP
FLASH
FLASH
PROG.
FLASH
RELEASE
LED
RECEIVER
FLASH
CHANNEL 2
INPUT 1
INPUT 1
5.1 MEMORY RESET
1.5s
PROG.
PRESS
1 X
BEEP
RECEIVER
MEMORY FULL INDICATOR
In case of full memory you will hear several acoustic signals for 10 seconds upon trying to memorize a new transmitter.
LOW BATTERY INDICATOR
Low battery indication consists on 4 acoustic sounds each time a message is received from a programmed transmitter. Both, warning LED and
buzzer are set on simultaneously.
TECHNICAL SPECIFICATIONS
Receiver suply voltatge
Transmitter suply voltatge
Receiver memory
Receiver Output
Receiver Power consumption
Ball pressure test (IEC 695-10-2)
Pollution degree
Protection class (IEC 60529)
Frecuency Channels
Range
Working temperature
Software
Rated transient over voltage
Transmitter power consumption
Maximum screw force
Machine Security Normative
CE DECLARATION OF CONFORMITY
Aplicaciones electrónicas y de Radiofrecuencia S.L Pol. Sot dels Pradals C/ Sot dels pradals, 4
08500 Vic (Barcelona) B61840732 DECLARES, under her own responsibility that product
complies with the requirements of the R&TTE 99/05/CE European parliament directive of March
9th 1999. This directive was transposed to the Spanish legislation by means of Real Decree
1890/2000 in November 20th of 2000. For more information visit the website www.aerf.eu
WIRELESSBAND 1.3 SLIM
ON
PROG.
RELEASE
LED ON
RECEIVER
CHANNEL 1
PRESS &
1 X
RELEASE
BEEP
TRANSMITTER 2
TRANSMITTER 1
TRANSMITTER 1
X
X
3s
PROG.
KEEP IT
# BEEPS
PRESSED
12/24 AC/DC
2x lithium battery 3V DC type CR2032
7 transmitters for each channel
2 - Relay,micro disconnection 1B
or power free contact
0.5 W - 12 V / 1,2 W - 24 V
PCB (125ºC) WRAP (75ºC)
2
Ip55
868.95MHz & 869.85MHz
100m
-35ºC to +55ºC
Class A
330V
Transmitting 17mA / stand by 16uA
0,4 Ncm
13849-2:2008 PL-C Category 2
1.5s
PROG.
PRESS &
PRESS
RELEASE
RECEIVER
TRANSMITTER 1
10s
WAIT
2 X BEEPS
TRANSMITTER 2
TRANSMITTER 2
INPUT 1
INPUT 1
X
X
10s
PROG.
RELEASE
WAIT
RECEIVER
WARNING!!
- Installation, start-up, modification and retrofitting of the
system may only be carried out by a qualified person.
-
Switch off the operating voltage before working on the system.
- The system doesn't have fuse protection. Is
recommended include exterior protection minimum
100mA and maximum 250mA.
RECEIVER OPTION 5 (ON)
1 X
BEEP
ON
1
SAVE &
EXIT
RECEIVER
OUTPUT 1
(TRANSMITTER 1)
2 X BEEPS
SAVE &
EXIT
2
3
4
5
OUTPUT 2
(TRANSMITTER 2)
4 - 4