array K KW8 User Manual - Page 13

Browse online or download pdf User Manual for Speakers array K KW8. array K KW8 17 pages.

Print Page

KW8

8. DMX CHANNELS

The unit operates using the digital DMX 512 (1990) signal. Both movement and some audio parameters

can be controlled by the 11 channels available.

In order to use the unit in 11 channels, set the following addresses on the speakers connected in the

same DMX network:

K-OWL 1

A001

K-OWL 2

A012

K-OWL 3

A023

K-OWL 4

A034

K-OWL ...

A...

To select the addresses, proceed as follow:

1. Press the UP-DOWN key until you reach the required DMX channel. The numbers on the display

will begin to flash (but the new DMX address hasn't been set yet).

2. Press ENTER to confirm your selection. The numbers on the display will stop flashing and the

speaker will be set to the new DMX address.

Note: If the display showing the DMX address flashes, then one of the following errors has occurred:

- DMX signal not present

- DMX address not valid

- DMX reception problem

just add 11 to the previous address

ENTER

DOWN

Ver. 1.2