Artison RCC300-FS Installation Manual - Page 11
Browse online or download pdf Installation Manual for Subwoofer Artison RCC300-FS. Artison RCC300-FS 15 pages.
IR FEEDTHRU
1. Connect a ⅛" Stereo MINIJACK to control the RCC600-SA via your integrated control
system.
2. Both the IR Feedthru Jack and the Front Panel IR receiver are designed to allow the User
functions to be programmed into an external remote. The Hexadecimal codes for the
amplifier are located on the web at:
POWER MODES
1. Select either:
ON – Always On.
AUTO – On with Signal Sense, without signal it will stay on for ≈15 minutes.
TRIGGER – On with a 12 Volt trigger.
2. +12V Trigger Input – Use the Green Phoenix Connector to connect a 12 volt trigger wire
from your other equipment, the polarity on the connector can be either way.
SETUP MODES
http://www.artisonusa.com
11