AluTeam BR 13x-3 Assembly Instructions Manual - Page 14
Browse online or download pdf Assembly Instructions Manual for Trucks AluTeam BR 13x-3. AluTeam BR 13x-3 14 pages. Box kits
Print Page7. Scope of delivery
Assembly instructions BR 133-3 to 139-3
Please understand that we must reserve the right to make changes to
the scope of delivery with regard to form, equipment and technology.
Included in the scope of delivery of a kit BR13x-3:
•
Fully assembled longitudinal supports with prepositioned brackets
according to motor vehicle type
•
Sub-structure hexagon screw M 12 with washer 3 mm MD 110020
and hexagon stop nut M 12 MD 120015
•
Floor module assembly with airline rails, with pre-assembled door-
stops and tail pull-out ladders as appropriate
•
Module assembly screw self-locking 6 x 25 MD 100318 with gasket
MD 110044 (connection floor / wall - external)
•
Front wall module assembly
•
2 side-wall module assemblies right-hand and left-hand, incl.rear
pillars, as appropriate with preassembled side marking lights, pre-
assembled ramming buffer and attached doors according to the
version
•
Roof module assembly with integrated frame cross beam,
including preassembled front roof corners and frame node
MA 430124 as appropriate, with pre-ass. reversing camera
MA 350172 or ..173
•
Rear roof corners MA 100060
•
Blind rivet MD 150027 for the riveting of the rear roof corners
•
For LBW kits: tail top gate with gas pressure spring and mounting
screws MD 100058, and material to fix the flaps on the sides (de-
pending on the type of flap)
•
Inside bracket front and rear for 14/31 mm walls MA 100068
MA 100069.R / MA 100069.L including fastening screws /
MD 100057
•
Module assembly screw M 6 x 21.5 self-locking, geomet-coated
MD 100224
•
Flat-head screws 10 x 20 with hexagon socket MD 100329
- connection aluminium pillars to roof
•
Cylinder-head screw M 10 x 60 MD 100328 for connection of the
aluminium pillars to bottom of the frame cross beam
•
Seal plug for screwed connection bores in the frame pillars
MA 150001
•
Hand grip MA 200152 with self-drilling fastening screws 4.8 x 16 mm
geomet-coated MD 100167
•
1-component sealant and adhesive, AluSeal traffic-white MA 310115
•
Adhesive cleaner Sika Activator / Cleaner 205 MH 240068
•
According to the version, matching adapter cable for connection of
the electrics to the rear lights
•
Paper tissues
•
Stick-on label with structure number
•
Assembly instructions
•
Further options:
•
Side rise MA 200373
•
Rain water deflector (for side door)
•
Preassembled fender bracket KS 320185
•
Rear-light bracket KM 390010360L or KM 390010360R
•
Stick-on label "Tested freight protection"
Attention: The stick-on label is only valid with a certificate
issued by AluTeam!
Status 03/2022
Former instructions lose their validity.
14 / 14