ACPro 2PAMSH18B-17.7 User Manual - Page 7

Browse online or download pdf User Manual for Air Conditioner ACPro 2PAMSH18B-17.7. ACPro 2PAMSH18B-17.7 16 pages. Single-zone ductless mini-split system

Print Page

Operating Instructions

Operating Temperature

Mode

Temperature

Room Temperature

NOTE:

1. Optimum performance will be achieved within these operating temperatures. If air conditioner is

used outside of the above conditions, certain safety protection features might come into operation

and cause the unit to function abnormally.

2. If the air conditioner runs for a long time in cooling mode and the humidity is high (over 80%),

condensed water may drip out of the unit. Please set the vertical air flow louver to its maximum

angle (vertically to the floor), and set HIGH fan mode.

Manual Operation:

Units are equipped with a switch to run emergency operation mode. It can be accessed by opening the

front panel. This switch is used for manual operation in case the remote control fails to work or

maintenance is necessary.

Cooling Operation

62ºF~90ºF

(17ºC~32ºC)

32ºF~122ºF

(0ºC~50ºC)

5ºF~122ºF/-15C~50ºC for models with low

temperature cooling system

Page 4

Heating Operation

32ºF~86ºF

(32ºC~86ºC)

5ºF~86ºF

(-15ºC~30ºC)

NOTE:

The unit must be turned off before

operating the manual control button. If the unit is

operational, continue pressing the manual control

button until the unit is off.

1. Open and lift the front panel up to an angle until

it remains fixed with a clicking sound.

2. One press of the manual control switch will lead

to the forced AUTO operation. If the switch is

pressed twice within five seconds, the unit will

operate under forced COOL operation.

3. Close the panel firmly to its original position.

CAUTION:

• This switch is used for testing purposes only.

Please do not use it unless necessary.

• To restore the remote control operation, use the

remote control directly.

Drying Operation

50ºF~90ºF

(10ºC~32ºC)

32ºF~122ºF

(0ºC~50ºC)