Acqua GY-NE42RFS User Manual - Page 5

Browse online or download pdf User Manual for Refrigerator Acqua GY-NE42RFS. Acqua GY-NE42RFS 14 pages.

Print Page
5

Installing your new appliance

Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency
of the cooling system and
save energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat.
For this reason, sufficient clear space
should be available around the
refrigerator.
Suggest
:It is advisable for there to be
at least 75mm of space from the back
to the wall, at least 100mm from its
top,at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135°. As shown in
following diagrams.
≥ 100mm
≥ 75mm
Note:
This appliance performs well within
●
the climate class from
the table below.
It may not work properly if being left at
a temperature above or below the
indicated range for a long period.
Class
Symbol
Extended
SN
Temperate
Temperate
N
Subtropical
ST
Tropical
T
Stand your appliance in a dry place
●
to avoid high moisture.
Keep the appliance out of direct
●
sunlight, rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
Do not place on carpet.
≥ 100mm
≥ 100mm
1022mm
N to T
showed in
Ambient Temperature
)
range(
°C
+10 to +32
+16 to +32
+16 to +38
+16 to +43
Hisense Refrigerator
Hisense Refrigerator
Leveling of appliance
For sufficient leveling and air
●
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner.
To allow the door to self-close, tilt the
●
top backwards by about 10mm.
Adjusting the door handle
Before you use the appliance, please check
the refrigerator handle. If the handles is
loose, please adjust them by using an Allen
wrench in the clockwise direction until
handle is securely in place. the handle is
fitted with 2 screws.
≤10mm
Hexagon socket
set screws
Allen wrench