Ask DP8000 Frequently Asked Questions - Page 2

Browse online or download pdf Frequently Asked Questions for Projector Ask DP8000. Ask DP8000 4 pages.

Print Page

Keypad

Press the Keystone Up arrow to reduce the upper part of the image, and press the Keystone Down arrow to reduce

the lower part. You can adjust keystone between -15 to +40 degrees.

Press the Menu button. Navigate to Basic > Keystone and press Select (keypad) or L button (remote). Use the Left

and Right Arrow buttons or trackball to adjust the value. Press the Select or L button to confirm your change.Finally,

change the Keystone setting. For most models, you can use the Keystone function on the projector keypad or in the

menu of the projector to adjust the keystone digitally.

Correcting horizontal keystoning

If you place the projector so that the lens is not perpendicular to the screen in the horizontal plane, the image can suffer

from horizontal keystoning.

If your image looks like the one above, slowly rotate the projector until the image is rectangular.

Please note that it is always better to achieve a rectangular image by moving the projector. Some images look much better

when there is no digital keystone correction.

The image appears to be stretched vertically or horizontally.

This may be the result of the Aspect Ratio being set to 16:9. In the menu of the projector, navigate to Basic > Setup >

Picture > Aspect Ratio and make sure 16:9 is not selected.