Asko ADA Series Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Dishwasher Asko ADA Series. Asko ADA Series 20 pages.

Print Page

XXL DISHWASHERS

UNIT DIMENSIONS

Height (Adjustable)
Width
Depth (Includes high loop)
Depth W/Door Open
Weight
23-5/8"
596 mm

PREPARING THE LOCATION

The best place for your dishwasher is in the kitchen near
the sink. This makes it easier to connect the water and
drain supply lines.
A built-in dishwasher must be enclosed on the top, both
sides and the back.
The power-supply receptacle for the appliance shall
be installed in a cabinet or on a wall adjacent to the
undercounter space in whitch the appliance is to be
installed.
The electrical and water supplies should enter through
the area indicated by the shading on the illustration at
right. Preferably, they should come through the right side
of the machine. The access hole must be round and
smooth and no bigger than 1-1/2˝ (38 mm) in diameter. If
the partition is metal, it needs to be covered with an edge
protector. Use caution when the appliance is installed
or removed, to reduce the likelihood of damage to the
power-supply cord.
** If accessory FI fill strips are used, then 1/2˝ (13 mm) must
be added to the dishwasher height and cutout. Additionally,
3/8˝ (10 mm) must be added to the dishwasher width and
cutout width. Remove locking nuts for an installed height
of 33-7/8˝ (860-861 mm).
Cutout Dimensions
U.S.
Height** 33-7/8˝ – 36˝
Width
23-5/8 – 24˝
Depth
24˝
4
U.S.
Metric
33-7/8˝ to 35-7/8˝
861 mm to 912 mm
23-5/8˝
596 mm
22-7/8˝
581 mm
49-1/2˝
1258 mm
110 Ib
50 kg
22-7/8"
581 mm
3-1/8"
79 mm
Metric
860 – 914 mm
600 – 610 mm
610 mm
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
Technical Data
Electricity
Water pressure
Heating element
Max loading
49-1/2"
1258 mm
Door
Reverse hose within the high loop
bracket to accommodate a left side drain.
/
3
"
4
(19)
TYPICAL
3 ½" (89)
FINISHED
RETURN
W
FRAMELESS CABINETRY
Framed cabinets will require additional finished filler material
behind the face frame for a proper installation.
5-3/8"
136 mm
23-5/8" – 24"
600 – 610 mm
120V, 60Hz, 15 amp
4.2 - 140 psi,
0.03-1.0 MPa,
0.3-10 Bar
1200 watt
1300 watt
2-7/8"
74 mm
3-3/8"
9"
85 mm
228 mm
3 ½" (89)
FINISHED
FILLER
RETURN
W
FRAMED CABINETRY