Asko CC4840S Operating Instructions Manual - Page 4
Browse online or download pdf Operating Instructions Manual for Ventilation Hood Asko CC4840S. Asko CC4840S 17 pages. Cooker hood
Print Page
GENERAL
Carefully read the following important information regarding installation safety and maintenance. Keep this
information booklet accessible for further consultations. The appliance has been designed for use in the ducting
version (air exhaust to the outside – Fig.1B), filtering version (air circulation on the inside – Fig.1A) or with
external motor (Fig.1C).
SAFETY PRECAUTION
1. Take care when the cooker hood is operating simultaneously with an open fireplace or burner that depend on
the air in the environment. The cooker hood removes air from the environment which a burner or fireplace need
for combustion. The negative pressure in the environment must not exceed 4Pa (4x10-5 bar). Provide adequate
ventilation for a safe operation. Follow the local laws applicable for external air evacuation.
Before connecting the model to the electricity network:
- Check the data plate (positioned inside the appliance) to ascertain that the voltage and power correspond to
the network and the socket is suitable. If in doubt ask a qualified electrician.
- If the power supply cable is damaged, it must be replaced with another cable or a special assembly, which may
be obtained direct from the manufacturer.
2. Warning !
In certain circumstances electrical appliances may be a danger hazard.
A) Do not check the status of the filters while the cooker hood is operating
B) Do not touch bulbs or adjacent areas, during or straight after prolonged use
C) Flambè cooking is prohibited underneath the cooker hood
D) Avoid free flame, as it can damage the filters and is a fire hazard
E) Constantly check food fr ying to avoid overheated oil becoming a fire hazard
F) Disconnect the electrical plug prior to any maintenance
G) This appliance is not intended for use by young children or infirm persons without supervision
H) Young children should be supervised to ensure they do not play with the appliance
I) There shall be adequate ventilation of the room when the rangehood is used at the same time as
appliances burning gas or other fuels
L) There is a risk of fire if cleaning is not carried out in accordance with the instructions
This appliance conforms to the European Directive EC/2002/96, Waste Electrical and Electronic Equipment
(WEEE). By making sure that this appliance is disposed of in a suitable manner, the user is helping to prevent
potential damage to the environment or to public health.
The
symbol on the product or on the accompanying paperwork indicates that the appliance should not
be treated as domestic waste, but should be delivered to a suitable electric and electronic appliance recycling
collection point. Follow local guidelines when disposing of waste. For more information on the treatment, re-
use and recycling of this product, please contact your local authority, domestic waste collection service or the
shop where the appliance was purchased.
INSTALLATION INSTRUCTIONS
Assembly and electrical connections must be carried out by licenced personnel.
• Electric Connection
The appliance has been manufactured as a class II, therefore no earth cable is necessary.
The plug must be easily accessible after the installation of the appliance.
If the appliance is equipped with power cord without plug, a suitably dimensioned omnipolar switch with 3
mm minimum opening between contacts must be fitted between the appliance and the electricity supply in
compliance with the load and current regulations.
The connection to the mains is carried out as follows:
BROWN = L active
- 4 -