Asko D1796FI Planning And Design Manual - Page 5

Browse online or download pdf Planning And Design Manual for Kitchen Appliances Asko D1796FI. Asko D1796FI 15 pages. Standard dishwashers
Also for Asko D1796FI: Use And Care Manual (12 pages), Quick Start Manual (2 pages), Installation And Customization (4 pages), Planning And Design Manual (19 pages), Use And Care Manual (12 pages), Installation Instructions Manual (14 pages)

Print Page

MODEL D1976

UNIT DIMENSIONS

Height

32-1/4"–35-1/2"

Width

24"

Depth

23-7/16"*

Depth w/door open

46-1/2"*

Weight

104 lb

24"

610 mm

FRONT PANELS

The front panels on Model D1976 (except

the stainless steel model) can be covered

or replaced with wood panels. See page 6

for instructions on how to change the front

panels.

CUTOUT DIMENSIONS

Height

32-1/4"–35-1/2"

Width

24"

Depth

23-7/16"

*This depth allows a 1" (25 mm) space for

the high-loop drain hose.

NOTE: Maintain a 1/8" (3 mm) minimum

clearance between unit and cabinet.

Specifications are subject to change without notice. See installation instructions for additional details.

Metric

819–902 mm

610 mm

596 mm

1181 mm

48 kg

50mm

6-1/4" to 8-1/4"

159-210 mm

Metric

819–902 mm

610 mm

The electrical and water supplies should

596 mm

enter through the area indicated by the

shaded area. Preferably, they should come

through the right side of the machine. The

access hole must be round and smooth

and no bigger than 2" in diameter.

ASKO D

TECHNICAL DATA

Electricity

Water pressure

Heating element

Max loading

46-1/2"*

EASYINSTALL SYSTEM

Every ASKO dishwasher comes with the

unique EasyInstall System that speeds the

installation and reduces problems. This

system has these components which are

approved by regulatory authorities (cUL):

• Over 5' of Pex hose that replaces the

24"

610 mm

• Over 6' of drainhose with an adaptable

• A 6' long electrical cord with standard,

ISHWASHER

120V, 60Hz, 15 amp

18-176 psi

1400 watt

1600 watt

water-inlet copper tubing. It has a 3/8"-

compression fitting that mates with the

shut-off valve.

drain connection.The high loop is built

into this hose on the back of the unit. If

this loop is removed to lengthen the

hose, another high-loop must be built

into the installation somewhere along

the line (typically where the hose passes

through the cabinet).

3-pronged, 110V plug. This eliminates

the need to wire anything under the unit.