Asko W6441 Gebruiks- en onderhoudshandleiding - Pagina 13

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Asko W6441. Asko W6441 20 pagina's. User manual use & care guide fr
Ook voor Asko W6441: Snelstarthandleiding (2 pagina's), Handleiding voor planning en ontwerp (19 pagina's), Servicehandleidingssupplement (10 pagina's), (Spaanse) Gebruiks- en Onderhoudshandleiding (20 pagina's), (Frans) Gebruiksaanwijzing en onderhoud (20 pagina's)

Asko W6441 Gebruiks- en onderhoudshandleiding
TR
TROUBLESHOO
TR
OUBLESHOO
OUBLESHOO
OUBLESHOOTING
TR
TR
OUBLESHOO
If you should experience a problem with your washer,
you should review the following list of frequently
encountered situations. It could save you the cost and
inconvenience of a service call.
Even though the product is under warranty, if the problem
is not caused by defective workmanship or materials,
you will be charged for a service call. Refer to page 16
to determine what is and is not covered under your
warranty. If you're still not sure, contact the ASKO
Advisory Center before you call a service technician.
BEFORE
BEFORE
BEFORE Y Y Y Y Y OU CALL
OU CALL
OU CALL
BEFORE
BEFORE
OU CALL
OU CALL
Before calling for service or contacting ASKO regarding
a warranty issue, make a note of the model name, type
number and serial number. The model is on the front of
the detergent drawer. The type plate with the type name
and serial numbers is located above the glass door. (See
illustration below.)
Model Name
Type plate
(see below)
Type Name
1 2 3 4 5 6
1 2 3 4 5 6
Type: WMxx
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
xx x xxxxxxxxMxxxxxxxW
EMER
EMER
GENCY DRAIN HOSE
GENCY DRAIN HOSE
EMER
EMERGENCY DRAIN HOSE
EMER
GENCY DRAIN HOSE
GENCY DRAIN HOSE
Should you ever need to drain the water from the unit in
the event of a power outage, use the drain hose next to
the pin trap, as illustrated below.
1. Using the flat edge of
the liquid detergent
partition piece, a flat-
head screwdriver or
similar item, gently pry
open the drain pump
cover, as illustrated.
2. Before you proceed, place a
shallow container on the floor
near the drain to catch the
water.
TING
TING
TING
TING
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
12-digit
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Serial
000000000000
Number
3. Pull the small black drain
hose loose from its position
on the door cover and let the
water drain into the container.
4. When the machine is empty,
reconnect the hose securely
to its position on the door before you close the drain
pump cover.
T T T T T he door w
he door w
he door w
on
on' ' ' ' ' t open.
on
t open.
t open.
he door w
he door won
on
t open.
t open.
♦ Make sure the power to the unit is on. If the power
is on and the indicator lamp is not lit, there is no
power supply. Check that the machine is properly
plugged into the electrical outlet. If it is, the fuses
may be blown. Call a service technician.
♦ Make sure all the water has drained out.
♦ If there is no water in the machine and the door won't
open in the normal manner, you should be able to
open it manually, as follows:
1. Make sure the tub is as empty as possible and
the power is turned off.
2. Using the flat edge of the liquid detergent
partition piece, a flathead screwdriver or similar
item, gently pry open the drain pump cover.
3. Using a T20 or flathead screwdriver, unscrew
the red plastic looped handle.
4. Pull the handle toward you. The door should
open.
T T T T T he mac
he mac
he mac
he machine w
hine w
hine w
hine won
on
on
on' ' ' ' ' t star
he mac
hine w
on
♦ Check that the glass door is closed securely.
♦ Make sure the power switch is turned on.
♦ If the power switch is on and the indicator lamp is not
lit, there is no power supply. Make sure the machine
is properly plugged into the electrical outlet.
♦ Check the house breaker switch/fuses.
T T T T T he mac
he mac
he mac
hine doesn
hine doesn
hine doesn' ' ' ' ' t f
he mac
he machine doesn
hine doesn
♦ Make sure the tap to the water supply line is open.
♦ Turn off the water supply then disconnect the inlet
hose and check to see if the strainer in the inlet
connection is blocked.
T T T T T he mac
he mac
he machine will not spin.
he mac
hine will not spin.
hine will not spin.
hine will not spin.
he mac
hine will not spin.
♦ Make sure the pin trap or outlet hose isn't blocked.
Clean if necessary. (See page 12.)
♦ Make sure the No Spin option is turned off.
♦ If a load is out of balance, the washer will rotate a
few seconds to redistribute the load then attempt to
spin again. It will do this up to ten times at a high
spin speed (1000 rpm or higher). If it still isn't
balanced, it will advance the timer with no spin.
Emergency
Door Handle
t star
t start. t. t. t. t.
t star
t star
t f
t f
ill.
ill.
t fill.
t f
ill.
ill.
Page 13