Aero Mist 60100K Installatie-instructies - Pagina 2
Blader online of download pdf Installatie-instructies voor {categorie_naam} Aero Mist 60100K. Aero Mist 60100K 2 pagina's. Aero mist 1000 psi misting pump installation instruction
Pagina afdrukken
LIST OF ALL ENCLOSED PARTS
QTY PART NO
DESCRIPTION
1
60100K
Direct-Drive Pump
1
56402
Flexible Nylon Tubing 25' Roll
1
52000
Automatic Drain Valve
57020 MAINTENANCE KIT
QTY PART NO
DESCRIPTION
1
57011
Filter Element
1
57025
Pump Oil
DIRECT DRIVE PUMP SPECIFICATIONS
MODEL
FLOW
VOLTS MOTOR PUMP
GPM
60 Hz
HP
RPM
60100K
1.0
120
0.75
1725
Maximum pressure is 1000 PSI, normal operating pressure is 800-1000 PSI.
RECOMMENDED MIN-MAX NOZZLE RANGE
NOZZLES
NOZZLES
Nozzle Size
.014
.012
Nozzle Range
12–25
15–30
Choose .012/.014 nozzles for dry climates and .008 for more humid climates.
Regulator
(Normal operating pressure 800-1000 PSI.
Pressure not to exceed 1000 PSI)
Liquid-Filled
Pressure Gauge
Outlet
To Misting Feed Line
Automatic
Drain Valve
Oil Filler/Breather Cap
Oil Sight Glass
• WARNING: Before plugging in the unit for the fi rst time, read the following section carefully. To reduce the risk of
electric shock. Plug in supplied grounded cord into a properly grounded receptacle. When servicing this unit, unplug
power cord before attempting any service or repairs.
• Install pump above grade level on a pre-formed concrete pad, 16"×16" minimum size.
• Plug power cord of unit into a properly grounded receptacle.
• Connect water line to water inlet connector.
• Unit is pre-fi lled with oil and ready to run. Oil should be half full on the sight glass when unit is off. Do not overfi ll.
• On new misting systems, fl ush lines before installing nozzles. The pump will not build pressure until all nozzles are installed.
• Do not exceed 1000 PSI and do not run pump without water.
• Winter shutdown: Unplug pump power cord, shut off water supply, remove fi lter bowl and drain water. Also drain water out of all lines, to
prevent damage to pump or lines.
• 25 feet or more of nylon tubing is recommended in order to reduce vibration noise.
ANNUAL MAINTENANCE INSTRUCTIONS
• Change oil every 500 hours of runtime or once a year. Use approved Pump Oil (52025). Oil should be half full on the sight glass when
LOAD
DIMENSIONS
unit is off. Do not overfi ll.
Amps
L x W x H
• Change Filter Element Annually
10.4
24x15x13
NOZZLES
.008
22–45
Oil Drain
INSTALLATION INSTRUCTIONS
On/Off Switch
Power Cord
Water Inlet
Filter Bowl
With Replaceable 5-Micron Filter Element