AerobTec Altis Micro Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AerobTec Altis Micro. AerobTec Altis Micro 17 pagina's. Recording / competition altimeter with telemetry

Pagina afdrukken

Fig 11: Firmware upgrade window

Note: there are two firmware types. One of them is marked, "F5J". This firmware complies exactly with

FAI F5J competition rules and no other options are allowed.

The Firmware marked, "Standard" allows more setting changes, including settings for F5J competitions. It

is recommended to use this firmware type during training and ordinary flights. However, this firmware type

is not allowed for use in certain competitions. It should be specified by the organizer of the competition,

which firmware is allowed.

If the firmware updates fails or if the process is interrupted, the device tries to update the firmware again

until it is successful. Once finished, your Altis Micro appears in the computer as a USB removable device

again.

If this does not happen or if the first start of the new firmware is not performed from USB, a safety function

is activated and backup firmware is written to your Altis Micro.

Backup firmware is indicated by the LED as a combination of short and long flashes ( . - . - . - . - . - . - ).

In this case, follow the firmware update instructions to update a new, valid firmware.

AerobTec Device Terminal is a device allowing you to display the data from your Altis Micro in the airfield

and to change its settings.

In order to use it, set ADT in COM usage settings. In case of F5J firmware or during the initialization, F5J

results are shown regardless of the settings.

Connect your Altis Micro Com port with Com port of the Device Terminal and the menu of Altis Micro will

appear automatically.

AerobTec Altis Micro User Manual