AeroComm ConnexLink Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AeroComm ConnexLink. AeroComm ConnexLink 8 pagina's.
Ook voor AeroComm ConnexLink: Gebruikershandleiding (20 pagina's)

Pagina afdrukken

ConnexLink User's Manual

1. Overview

The ConnexLink products provide a wireless RS232 connection between different devices. Each

ConnexLink unit can be programmed as a Server or a Client, allowing for the creation of a two

device or multiple device wireless network. In addition, multiple networks can be created by

programming each network of ConnexLink units with unique Channel Number and System ID

combinations. See Figure 1 below. To create a wireless network, simply program one of the

units as a Server and the other units as Clients.

Figure 1 - Multiple Networks Of ConnexLink Units

Example: Channel Number = 13

System ID = 001002003004005006007008

1.1

ConnexLink Definitions

1. Pwr: Red LED indicates power is connected to the unit.

2. Link: Green LED indicates the Client unit(s) and Server unit are in range of one another.

3. Rx: Red LED indicates when a ConnexLink unit is receiving data.

4. Tx: Green LED indicates when a ConnexLink unit is sending data.

5. Reset Button: Push-button switch located closest to the power connector and serial

cable on the bottom of the unit. See Figure 2 below.

6. Program Button: Push-button switch located next to the Reset Button on the bottom of

the unit. See Figure 2 below.

6/3/2002

Figure 2 - ConnexLink Bottom View

Example: Channel Number = 25

System ID = 012023034045056067078089