Air Cleaner profiSteril Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Air Cleaner profiSteril. Air Cleaner profiSteril 17 pagina's. Uv
Pagina afdrukken
Air Cleaner profiSteril, UV sterilizátor vzduchu / UV air sterilizer
objednací číslo / SKU: OST30100 profiSteril 100 / OST30200 profiSteril 200 / OST30300 profiSteril 300
SAFETY INSTRUCTIONS AND WARNINGS
•
Entrust the connection of the device to an authorized qualified person who will respect the local electric standards and
safety rules for the operation with the electric devices.
•
The air sterilizer has a built-in power supply. Never open the cover of the device! There is a risk of electric shock.
•
Do not place metal objects or liquid containers on the air sterilizer. This could result in electric shock and damage of the
equipment.
•
Do not store or operate the air sterilizer near heat sources, such as radiators, power supplies for other electrical
appliances, etc.
•
Do not place or install the unit on vibrating or unstable surfaces.
•
Never cover the ventilation openings!
•
Before connecting the appliance to the mains and switching it on, always check that the power cable and its connector
are not damaged. A defective or damaged power cord can cause electric shock, permanent damage to health, or
irreversible damage to the equipment. If the plug or power cord is damaged, it must be replaced by a qualified technician
or an authorized service center.
•
When disconnecting the appliance from the mains, always pull the plug, never the power cord itself. Do not connect or
disconnect the device to the mains with wet hands!
•
If the product is damaged to such an extent that its internal components are visible, never connect the air sterilizer to
the mains and do not turn the device on. Contact your dealer or the nearest authorized service center.
•
To reduce the risk of fire or electric shock, do not expose this product to weather conditions (rain, snow, etc.) or
excessive humidity.
•
Connect the product only to a grounded AC outlet with an operating voltage of 220 ~ 240V AC (50 Hz, recommended
fuse 10-16A). Prior to connection, make sure that the mains voltage corresponds to the technical specifications of the
product.
•
Unplug this device during lightning storms or when unused for long periods of time.
•
If the air sterilizer has not been used for a long time, acclimatize it to room temperature before use. Water vapor may
condense inside the unit and damage it.
•
Do not store or operate the device in a humid environment or outdoors.
•
The air sterilizer is intended for indoor use.
•
Do not touch the device during and/or immediately after operation.
•
Safety principles, local regulations and legislation must be observed and adhered to when installing and using the
device. This will prevent possible accidents and damages to health and/or property.
•
Power cords must be securely fastened out of the reach of unauthorized persons.
•
As part of a permanent fixed installation, always secure the air sterilizer with a safety cable or chain that is separately
anchored to the wall or supporting structure.
•
During installation, make sure that there are no people in the space under the device. The device must be installed or
located at least 0.5 meters from flammable materials.
•
Provide sufficient space for cooling on each side of the device. A minimum clearance of at least 1 meter is recommended
for active cooling vents.
•
This air sterilizer is equipped with a germicidal UV light source that emits UV-C radiation. Never switch on the device
without the cover fitted! Do not look into the UV light source and ensure that UV-C radiation does not come into contact
with the skin. There is a risk of permanent damage to eyes and health!
•
Do not switch the air sterilizer on and/or off at short intervals. This significantly reduces the service life of the light
sources and the device itself.
•
Store and operate the air sterilizer out of the reach of children. Do not leave the device unattended.
•
Do not use cleaning sprays or chemicals to clean and/or maintain the equipment. Their residues cause dust, grease
and other impurities to settle on the device. Use a dry or damp cloth for cleaning.
•
In the event of a fault, contact your dealer or authorized service center. Do not tamper with the device. In case of
problems, always consult with an expert.
•
Always handle the air sterilizer with clean and dry hands.
•
Do not force the controls (buttons, potentiometers, etc.) and do not subject the device to mechanical pressure.
•
Do not operate the air sterilizer near other electronic devices that may cause interference (eg power supply interference,
control signal, etc.).
•
Repairs may only be carried out by an authorized service center or by professionally trained and qualified persons. Only
original spare parts may be used for repairs. Do not carry out any work on the device, as this may cause irreversible
damage to the device.
•
If the air sterilizer will not be used for a long time, turn the mains switch to the OFF position (if equipped) and disconnect
the appliance from the mains.
•
Disconnect all connecting and power cables before moving the air sterilizer.
•
Keep the original packaging and padding for safe transport and storage of the device.
The power supply of the device operates under dangerous voltage. Do not touch the cover of the device and
never remove the cover of the device during operation. Always disconnect the device from the mains before
maintenance and handling. Danger of electric shock!
Follow the warnings and instructions in this user guide.
Instrument operating temperature: 5 ° C (41 ° F) to 35 ° C (95 ° F).
CZ / SK / EN