ASTi Sound+Sleep ASM1002 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ASTi Sound+Sleep ASM1002. ASTi Sound+Sleep ASM1002 12 pagina's. Adaptive sound sleep therapy system
Ook voor ASTi Sound+Sleep ASM1002: Gebruikershandleiding (12 pagina's), Gebruikershandleiding (8 pagina's)
Pagina afdrukken
Technical Information
Specifications
SoundStories
Speaker Compensation
Headphone Jack
Power Requirements
How to Restore the Factory Settings
(This sets the unit back to its original condition "fresh out of the box")
First turn unit Off. Then press the Power button and hold until the
panel lights blink (about 5 seconds.)
Trouble Shooting
If your unit exhibits a problem, try the appropriate actions below to
resolve the problem.
SYMPTOM
No operation when
power switch is
pressed.
Unit is On, but no
sound is heard.
Other unexpected
behavior.
Customer Support
If you have problems or questions, please contact Adaptive Sound
Technologies, Inc. 1-408-377-3411 ([email protected])
10
5-band parametric EQ
3.5 mm stereo
5V, 500 mA DC
POSSIBLE CAUSE
Disconnected power
plug.
Unit is connected to a
switched wall outlet.
Faulty wall outlet.
System needs to be
reset.
Volume is set too low.
Try the "factory reset"
procedure.
8
SOLUTION
Check the power
connection on the bottom of
the unit and at the wall
outlet. Be sure that both are
firmly seated.
Move the unit to an
un-switched outlet.
Move to a working outlet
and power on again.
First power off the unit, then
press and hold the Power
Button for 5 seconds.
Press or hold Volume Up
button to increase volume.
1) Unplug power adapter
from the AC outlet 2) Press
and hold the Power Button
down while plugging power
adapter back into AC outlet.
3) Continue to hold power
button down for 5 seconds.
4) Repeat 1-3 up to three
more times if unit does not
turn on.