Amerisolar AS-6P21 Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Amerisolar AS-6P21. Amerisolar AS-6P21 11 pagina's. Solar module

Pagina afdrukken
Worldwide Energy and Manufacturing (Nantong) Co., Limited

1. General information

This manual contains information regarding the installation and safe handling of Amerisolar
photovoltaic modules. Installers should read this manual carefully and follow the instructions
strictly prior to installing the modules. Failure to follow these instructions may result in death,
bodily injury or damage to property.
The installation of modules requires specialized skills and should only be performed by
qualified, licensed professionals. If you have any questions about installation, please contact
us for further information.

2. Safety precautions

Amerisolar modules have passed all required safety tests according to the IEC 61730 and
are rated with Application Class A, and within this application class modules are considered
to meet the requirements for Safety Class II.
All installations must be performed in compliance with all local and national applicable
standards, codes and regulations.
Installers should assume all risks of injury that might occur during installation, including,
but not limited to, the risk of electric shock.
Do not use mirrors or other magnifiers to artificially concentrate sunlight on the modules.
Do not attempt to disassemble the modules or remove any components from the modules.
Do not install the module in the rain, snow or in windy conditions.
Use electrical insulated tools and appropriate protective equipment to reduce risk of
electric shock.
Cover the module with an opaque material during installation to keep electricity from being
generated.
Do not disconnect under load.

3. Storage and unpacking

Store modules in a dry and ventilated room.
Do not stack packing cartons more than two layers high.
Unpack module pallets with care and follow the unpacking steps. Be careful when
unpacking, transporting and storing the modules.
Do not lift the module by grasping the module's junction box or electrical leads.
Do not place modules on top of each other.
Do not stand or step on the module.
1