Acer Aspire 6100 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acer Aspire 6100. Acer Aspire 6100 32 pagina's. Acer aspire 6100: user guide
Pagina afdrukkenTurning off your Aspire
Option 1: Quickstart OFF • Your Aspire will continue to run
in the Quickstart OFF condition. It will appear that it is OFF.
When you press the power button to switch your Aspire into
the fully ON condition, it will do it in only a few seconds.
Option 2: Traditional OFF • If you want your Aspire to com-
pletely power OFF (if you need to unplug it):
1 • Click on the Windows Start button on the taskbar.
2 • Click on Shutdown.
3 • Click on Shutdown the Computer and click Yes. Your com-
puter will guide you through saving any open files and then will
shutdown Windows 98. Your computer will then turn off all
computer power automatically. You will have to manually turn
off your monitor after you see the computer power go off.
Refer to My Aspire Guide software for more in-depth options
and recommendations for Quickstart and traditional on/off
modes.
8
The Mouse
The mouse uses a cursor called a pointer. Pointers come in
many different shapes but are most commonly shaped like an
arrow.
Your mouse has two buttons: a left button and a right button.
Quickly pressing and releasing one of these buttons is called
clicking. Sometimes you will need to double-click–or click the
same button twice quickly.
In this manual, click means to position your mouse point on an
icon and to single click the left button. When a right click is
required, this is stated clearly. Double-click also refers to the left
button.
Note: If you are left-handed, please refer to your Windows 98 manual
for instructions on how to set up your mouse for left-handed use.
Right button
Left button
Caring for
your Mouse
Pointer movement on the
screen is controlled by the
movement of a small ball
on the bottom of the
mouse.
Using a mouse pad under
your mouse will help to
keep the internal parts of
the mouse clean. A dirty
mouse results in jerky
pointer movement and dif-
ficulty getting the pointer
where you want it on
screen.
To clean your mouse:
1 • Turn the mouse upside
down.
2 • Remove the ring holding
the ball in place by turning
it counter-clockwise.
3 • Using a lint-free cloth or a
cotton swab dipped in rub-
bing alcohol, clean all mov-
ing parts.
4 • Insert the ball back into
the mouse, making sure to
turn the ring clockwise.
9
An Introduction to Your Aspire