DAGE-MTI Investigater Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DAGE-MTI Investigater. DAGE-MTI Investigater 17 pagina's. Ccd camera gater & frame grabber

Pagina afdrukken

SIGNAL LEVEL

The output video level of the

drives the

SIG LEV

output video is too low, Green when it is right, and Red when

it is too high. This ensures that the image output is always

right.

ACTIVATE

This pushbutton switch works with the

switch and the rear panel

gating process. To initiate a gating sequence, merely push

the

button. The green LED above the switch lights,

ACT

showing that gating is occurring. When the gate cycle has

been completed, the light turns off. When in the

another gating cycle automatically begins.

The

ACT

switch. If the

button is pressed, the gating process is halted and the live

image is displayed. If while in the

button is pressed, the gating process will begin and the

memory contents will be displayed.

LIVE

The

LIVE

being displayed on the output of the

button can be used to toggle between the un-gated incoming

video and the captured gated video. When the unit is initially

turned on, it will be in the

LED. The LED lights Yellow when the

SGL/RUN

button works in conjunction with the

InvestiGater

button allows the selection of input video

InvestiGater

switch to control the

is actively gating when the

LIVE

InvestiGater

mode.

LIVE

is sensed and

GATE TIME

RUN

LIVE

mode the

ACT

. The

mode,

LIVE