Baumer HMG11 N29 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Baumer HMG11 N29. Baumer HMG11 N29 41 pagina's. Absolute encoders with profinet interface

Pagina afdrukken

4. Project Setup

All examples in this manual refer to SIEMENS

using other tools please proceed correspondingly. All screenshots in this manual were taken from Step7 V5.5

SP3. Of course, the encoder may as well be inserted into a project using the SIEMENS TIA-Portal.

4.1. Importing the GSDML file

First the attached GSDML file must be imported to enable implementation of the encoder in the engineering

software. The file format is xml ("Extended Markup Language"). With reference to the Profibus GSD files,

GSDML is the common term.

The GSDML file is either supplied on a CD or available for download at www.baumer.com / „Downloads" →

Software. Search for the term „Profinet". Download the zip archive „BMxx Beschreibungsdateien PROFINET".

The following GSDML file versions apply:

•

GSDML-V2.2-Baumer_IVO-GXMMW_PN_V41-20150407.xml (and later)

for encoders with firmware V2.10 or later.

End of the file name is the release date.

The import operation is performed by Step7

GSD File..."). As a prior step it may be necessary to close the actual hardware project („Station - close") to

enable successful import. Based on the default settings, any change is configured as described below. The

GSDML file itself is not modified.

In the following dialogue please select the directory including the GSDML file. Mark the file on screen. „Close"

will finalize the operation. The same directory also includes the corresponding Bitmap file providing a small

encoder image in the engineering tool. This file is automatically installed in parallel.

Baumer_BUDE-PROFINET_MA_EN.docx

14.06.2016 / bja

PLCs and the widely used engineering tool Step7

software in the hardware window (HW Config, „Options – Install

8/41

. When