Baumer HUBNER HG 16 Montage- en bedieningsinstructies - Pagina 5

Blader online of download pdf Montage- en bedieningsinstructies voor {categorie_naam} Baumer HUBNER HG 16. Baumer HUBNER HG 16 28 pagina's. Encoder without bearings - incremental

Pagina afdrukken

General notes

1.1

Symbol guide:

Danger

Warnings of possible danger

General information for attention

Informations to ensure correct device operation

Information

Recommendation for device handling

1.2

The incremental encoder HG 16 is an opto electro nic precision measurement device which

must be handled with care by skilled personnel only.

1.3

The storage temperature range of the device is between -15 °C and +70 °C.

1.4

The operating temperature range of the device is between -30 °C and +100 °C,

measured at the housing.

1.5

EU Declaration of Conformity meeting to the European Directives.

1.6

The device is UL approved.

1.7

We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association

of the German Electrical Industry).

1.8

Maintenance work is not necessary. The device may be only opened as described in this

instruction. Repair work that requires opening the device completely must be carried out by the

manufacturer. Alterations of the device are not permitted.

1.9

In the event of queries or subsequent deliveries, the data on the device type label must be

quoted, especially the type designation and the serial number.

1.10

Disposal (environmental protection):

Do not dispose of electrical and electronic equipment in household waste. The product

contains valuable raw materials for recycling. Whenever possible, waste electrical and

electronic equipment should be disposed locally at the authorized collection point. If

necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-

ally. For further information see www.baumer.com.

Warning!

Damaging the seal

MB034T1 - 11072280

on the device invalidates warranty.

Baumer_HG16-T1_II_DE-EN (20A1)

General notes