Baumer Hubner HMC16 Series Montage- en bedieningsinstructies - Pagina 14
Blader online of download pdf Montage- en bedieningsinstructies voor {categorie_naam} Baumer Hubner HMC16 Series. Baumer Hubner HMC16 Series 44 pagina's. Encoder without bearings - incremental
Pagina afdrukken
MOUNTING / TIGHTEN THE CLAMPING RING SCREW AND ADjUST THE SySTEM
4.3
Tighten the clamping ring screw and adjust the system
)
Check the flush alignment of the rotor and the stator front edge and adjust correct
distance between stator and clamping ring front edge, see figure.
Max� tightening torque:
M
= 3���4 Nm
t
* Siehe
page 6
10/40
0�4 mm
Nominal air gap
3*
1*
4*
2*
1*
4*
+0�2 mm
-0�2 mm
MB168T1EN - 11184527, 19A2, Baumer_HMC16-T1_II_EN
2*
0
0
15 mm