Follett HCD710ABS Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Follett HCD710ABS. Follett HCD710ABS 8 pagina's. Ice storage bins
Ook voor Follett HCD710ABS: Handleiding voor installatie-instructies (17 pagina's)
Pagina afdrukken
1 – Locating the ice machine
Horizon Elite self-contained Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up
to 75' (22.9 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications) require special attention to
service access, unit ventilation and ice tube runs (see pages 4-8).
Top mounting – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with
nugget ice. See page 4 for compatible ice
and beverage dispenser models and top
kit numbers.
2. Verify ceiling or soffit height to ensure
sufficient top clearance.
RIDE model – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with
nugget ice. Compatible dispensers
include Servend MD150/175/200/250,
SV175/200/250, MDH-402, and Follett
Symphony Plus
110CM as well as the
™
dispensers listed on page 4.
2. Coca-Cola Freestyle 7100 requires top
adapter IC Code 46751 and ice kit IC Code
46430 and must be ordered from Coca-Cola.
Coca-Cola Freestyle 9100 requires top kit
HSF26SC. Consult with Coca-Cola and Follett
to qualify application prior to ordering.
3. RIDE application is approved only for
Pepsi Spire 3.0, 5.0 and 4.1 designed for top
mount ice machines and requires MSP24SC
for 3.0 and MSP30SC for 5.0 and 4.1, ordered
separately. For manual fill versions of
Pepsi Spire 3.0, 5.0 and 4.1, contact factory.
4. See pages 4-6 for critical clearance and
venting requirements.
Self-contained 710 series ice machine
RIDE model – Follett low-profile Vision
ice and beverage dispensers
Important specifier notes
1. See pages 4-6 for critical clearance and
venting requirements.
2. Ice transport tube ships with Vision
ice and beverage dispenser (Vision
applications only).
RIDE model – drop-in beverage
dispensers (by others)
Important specifier notes
1. Compatible with the following dispensers:
Cornelius 1522, 1722, 2323 and Lancer
2200, 2300, 23300.
2. Requires 12.00" (30.5 cm) of access space
for installation on transport tube side.
3. See page 5-6 for critical
clearance requirements.
Top mount on Follett ice storage bins
Important specifier notes
1. See form# 8590 for bin sizing.
2. Verify ceiling or soffit height to ensure
top clearance.
3. Locate floor sink or grate and drains in front
of storage bin.
4. Do not position bin drain lines to block
Ice•DevIce
bin cart.
™
RIDE model – Follett ice storage bins
Important specifier notes
1. See form# 8590 for bin sizing.
2. Locate floor sink or grate and drains in front
of storage bin.
3. Do not position bin drain lines to block
Ice•DevIce bin cart.
3
Form# 8225