AmpliVox SW800 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AmpliVox SW800. AmpliVox SW800 8 pagina's. Battery powered pa system
Ook voor AmpliVox SW800: Gebruikershandleiding (10 pagina's), Gebruikershandleiding (8 pagina's), Gebruikershandleiding (10 pagina's), Gebruikershandleiding (12 pagina's)

Pagina afdrukken

COMPACT DISC / MEDIA PLAYER OPERATION

FUNCTIONS

POWER: Press Power button to turn CD Player on. This

knob increases the output level when turned clockwise,

and decreases the volume when turned counter clockwise.

This is in addition to the main volume control function.

PLAY/PAUSE: Starts playback of the current selection,

and also stops the selection when pressed during play-

back. When the button is pressed again, playback resumes

at the point where the selection was stopped.

· STOP: Press to completely stop the CD from playing.

Pressing the (play) button will start the CD from the begin-

ning of the first selection on the disk

· FOLDER BUTTONS: Select which folder in USB or SD

storage devices to play. Down

folder or selection, UP

folder or selection.

· SKIP BUTTONS: Down

selection, UP

skips forward to the next selection.

Hold button while song is playing and will fast-forward.

REMOTE CONTROL

The remote control for the SW800 is used only to operate the

controls of the Media Player ONLY from the backside (control

side). The remote control can be used up to 50 feet from player.

Must be in direct line of sight for best results.

REMOTE: To operate the CD player or SD / USB reader

with the remote control, the button on the remote la-

beled device you wish to play must be pressed first.

Once the button is pressed, all buttons will continue to

control their respective functions on the CD / Media Player

until one of the other input buttons is pressed.

See FUNCTIONS above for explanation of buttons.

BLUETOOTH MODULE

PAIRING WITH A BLUETOOTH DEVICE

The Bluetooth® receiver has its own power /

volume switch. Before turning receiver on, the

main power for the PA must be on.

Rotate switch clockwise to turn on. Once

turned on you will hear a short music sound

confirming that it is now on.

The status LED will begin to flash RED indicat-

ing that you are now ready for pairing your

Bluetooth device.

You need to first enable Bluetooth on you de-

vice. When enabled you will be in the

"discover" mode. You will see a list of devices.

Choose "AmpliVox" or "AmpliVox S1500".

The Bluetooth® word mark and logo is a registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by AmpliVox Portable Sound

Systems is under license.

backs up on the current

moves forward on the current

skips back to the previous

CONTINUED

PROGRAM (PROG): Used to program order of songs to

play on CD. Press button. PROG lights up on display.

Rotate POWER/VOL knob to song number. Press SHUF

to confirm. Repeat to program another song. Press PLAY

to start program order. Press Program button to cancel

function.

REPEAT: Song that is currently playing, REPEAT lights

up on display or repeat all CD tracks, ALL lights up.

EJECT: Press button. After the CD has stopped playing,

CD disk will eject from the player.

MODE: SD /USB/CD Button selects between SD, USB

and CD playback. Function lights up on display when

media is inserted into slot..

SHUFFLE (SHUF): Random playback of all music

tracks.on CD, SD Card, or USB Thumb Drive. SHUF will

light up on display.

MUTE: Press to silent music but will continue to play.

MUTE will light up on display. Press to release MUTE.

Once your device is "paired / connected" the

status LED will stop flashing and turns

GREEN.

You can now stream audio from your device to

the PA.

The three control buttons, in the center, can be

used to Start- Pause / Advance / Back, your

streaming music from your device.

Adjust volume to desired level using Main Vol-

ume Control / Bluetooth Receiver

Volume Control and your device volume

control.