DPA 4062 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DPA 4062. DPA 4062 16 pagina's. Miniature microphones

Adjusting the Type 4066 Headband

The size of the headband mount may easi-

ly be adjusted. Change the standard bend

by carefully expanding the distance

between the earhooks.

The 4066 Adjustable Miniature Microphone

Headband is supplied with the boom mounted.

To change sides simply click the boom out

of the clips and follow the instructions

below.

• Hold the boom in your right hand when

mounting on the right side and vice versa.

Hold the boom by the cable relief.

• Position your hand with the boom between

the ear hooks and turn the boom around in

the loop. Take your hand with the boom

under the headband and draw it towards you.

• Secure the microphone boom into the

two clips next to the ear hook beneath

which the boom is to be mounted. Next,

secure the boom in the clip in the middle of

the headband. This clip is movable and should

be placed near the end of the microphone

boom, before the cable relief (where the

soft cable begins to be visible). The remaining

two clips are not used (unless two booms

are to be mounted on the same headband.)

The soft cable should not be attached into

the clips.