Amprobe ROBIN KMP7010 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Amprobe ROBIN KMP7010. Amprobe ROBIN KMP7010 16 pagina's. Ground resistance tester
Pagina afdrukken
DANGER!
: identifies conditions and actions that most likely pose
�
hazard(s) or death.
WARNING!:
�
death.
CAUTION
: identifies conditions and actions that will pose hazard(s) or
�
damage the Tester.
DANGER!
�
• Do not use the Tester around explosive environment, which may cause
fire and explosion.
• Do not use the Tester in wet environment or do not make any
connection when your fingers are wet.
• Do not apply the load more than the Tester capacity or range.
• Do not open battery compartment while testing.
WARNING
�
• Do not use the Tester if it is damaged or metal part is exposed.
• Do not disassemble the tester. If it needs repair, please refer to our
warranty statement.
• Do not change battery or open battery compartment when the Tester is
wet. Soft cloth should be used to dry it first.
• Make sure the Tester is turned off when changing battery or opening
the battery compartment.
CAUTION
�
• Ensure test leads are properly inserted into the corresponding port
before measurement.
• Remove the batteries from the Tester if the tester will not be used for a
long time.
• Do not expose the Tester in extreme temperature and wet environment.
• Soft cloth and mild detergent should be used to clean the surface of the
Tester when servicing. No abrasive and solvent should be used.
identifies conditions and actions that will pose hazard(s) or
3