Amprobe 195112009185 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Amprobe 195112009185. Amprobe 195112009185 11 pagina's. Ultrasonic leak detector
2. INTRODUCTION
Ultrasonic sound, or ultrasound, is a sound wave with frequencies above 20 kHz, higher
than the upper audible limit of human hearing. Ultrasound can be generated when
turbulence created by air or gas is forced through a small orifice. Leaking air or gas is
generally considered to be viscous flow, and as the flow velocity increases, the frequency
of the ultrasound emitted becomes higher. Vibrating, moving objects or electric discharge
will also create an ultrasonic wave, which is very directional in nature and can be used to
pinpoint the exact location of a leak, vibration or discharge.
The ULD-405 Receiver detects ultrasounds within 20 kHz to 90 kHz frequency, then amplifies
and converts these ultrasonic sounds to frequencies and levels that the human ear can hear
through headphones and show it on the LCD screen. The 20 kHz to 90 kHz frequency range
is the optimal range for detecting a variety of leakage events in assets such as HVAC systems
and pneumatic lines. A change in the ultrasound produced by an asset may be indicative
that an asset is beginning to fail.
0
20 Hz
200 MHz
20 kHz
20 MHz
Infrasound
Acoustic Sound
Ultrasound
Figure 2: Sound range spectrum
3
GlobalTestSupply
www.
.com
Find Quality Products Online at: