AMSEC EST914 Belangrijke bedieningsinstructies - Pagina 3
Blader online of download pdf Belangrijke bedieningsinstructies voor {categorie_naam} AMSEC EST914. AMSEC EST914 6 pagina's.
Ook voor AMSEC EST914: Gebruiksaanwijzing en garantie (6 pagina's)
Pagina afdrukken
Once the day is entered, pressing the # will move to the time field. It's important to note the time is displayed in military time,
meaning any hour after 12:59 p.m. continues up to the next number sequence, like so: 13:00 (1 p.m.), 14:42 (2:42 p.m.), and so on,
up to 23:59 (11:59 p.m.) with Midnight being 00:00. Thus the time will need to be set accordingly.
QUICK REFERENCE: To quickly compute military time, simply add 12 to any hour after 1 p.m. and up to 11:59 p.m. (minutes
always stay the same). From Midnight to 12:59 p.m., hours remain the same.
The last field, week, is the day of the week, 1 – 7, where 1 represents Monday, 2, Tuesday, and so on. You can choose what day will
begin the start of the week.
PERSONAL/ADMINISTRATOR CODES
The personal code #1234# and the administrator code #123456# are set up before leaving the factory. For your protection and
security, it is recommended that these generic codes be changed to something familiar and easily remembered, and known only
by the Administrator or owner.
Administrator and personal codes must be entered before creating or changing ANY codes. A personal code simply is a code set
up and given out by the administrator to allow another user limited access.
IMPORTANT NOTE: The administrator has the ability to view an "Open Door" record, which will display the time, date and code of
the last person accessing the safe (more about this later).
ALWAYS KEEP A HARD COPY OF PASSCODES -- BUT NOT IN THE SAFE!
DOOR MECHANISM
STEP 1 - OPENING THE SAFE
1 Press the # key.
2 Enter user code (Factory Personal Code is: 1-2-3-4)
(Factory Administrator Code is: 1-2-3-4-5-6)
3 Press the # key.
4 The LCD display will turn Blue and show Open.
5 Turn the Knob clockwise (Right) and open door.
6 If the wrong user code is entered the display will
show "Error". If the wrong code is entered 3 times
consecutively, an alarm will sound for 1 minute
unless the correct code is entered.
7 If you do not want your personal code shown on
the LCD display press the # key followed by the *
key. The LCD display will turn Blue. This function
will be cancelled after each opening.
NOTE: Lock can store 2 user codes.
Each time the door is opened or closed, and the Knob is left in the 'unlock' position, the door will remain unlocked until the Knob
is turned to the 'lock' position.
If a code is successfully entered (confirmed in the display by the words "OPEN") but the Knob is not turned, the operation will
time out in 5 seconds and the safe will remain locked. The code will again have to be entered and the Knob subsequently turned
within 5 seconds to gain access to the safe. If the Knob is turned to the 'lock' position while the door is open, you will have
to re-enter your code to close the door.
CONCEALING YOUR CODE:
Your code may be hidden from view by others. Press # then * then your code #. The display will only show 0 each time a number
button is pressed.
NOTE: This must be done each time you enter your code to prevent the actual number from appearing on the display as you
enter your code.
TAMPER ALARM:
You may set a Tamper Alarm that will sound if anyone attempts to move or attack the safe.
In the sleep mode, Press 0 on the key pad. The key pad display will show BELL ON. To turn alarm off, enter # the current code, and
then # . If no code is entered to clear an alarm, the alarm will clear after 1 minute.
OPEN DOOR RECORD QUERY
At any time you can view the time the safe was accessed, in addition to, who accessed it. The personal code is "PASS1" and the
administrator is "PASS2. "
To access the records, enter either code to open the door. When "OPEN" disappears from the display, but while the blue backlight
is still on, press 0. The screen will first show the date then the time the safe was accessed followed by the code used to access it.
You can view up to 14 past entries. To do this, press 0 when the display screen shows "PASS1" or "PASS2. " It will show open door
records for the last 14 times the safe was accessed and by which code. Example: ##-##-## = Date, ##-## = Time
STEP 2 - CHANGING THE USER CODE
1 Open the safe by following step 1.
2 While the screen is still blue, press the * key.
3 Enter your new user code (1-8 digits).
4 Press the # key.
5 The LCD display will turn Blue and show INTO.
6 Your new user code is now set to open the safe.
7 If you forget your new code, remove the
protective cap (if equipped) and press the "Red"
reset button on the back of the door to restore
the Personal and Administrator codes back to the
original factory codes.
CAUTION: Be sure to replace the protective cap back
over the Red reset button (if equipped) to prevent
accidental contact from stored contents.
NOTE: It is highly recommended to leave the safe
door open and practice your new code several
times before closing the door.