Alemlube WP1290 Technische handleiding eigenaar

Blader online of download pdf Technische handleiding eigenaar voor {categorie_naam} Alemlube WP1290. Alemlube WP1290 2 pagina's. Large capacity water hose reel

Pagina afdrukken

Description

The WP1290 large capacity water hose reel is supplied complete with 30 metres of 12mm ID hose, a 1.2 metre long lead-in hose and

a water nozzle. Ideal for industrial, automotive, agricultural or garden applications where long lengths of hose are required, the WP1290

provides you with a cost effective means of storing and retrieving longer type hose assemblies in your workshop or garden. The reel

can be wall, ceiling or floor mounted and the detachable mounting bracket facilitates simple reel mounting and storage (if required).

The convenient carry handle also assists in the process of mounting and/or storing your new WP1290. The WP1290 has a maximum

working pressure of 140psi (10 bar).

Specifications

Uses

Hose Length

Materials

Weight

Outlet/Inlet

Max. Temperature

Installation of Reel

1 You will need to purchase the appropriate hardware for the mounting of

your hose reel.

The base of the hose reel has three 10.5mm (13/32") drilled holes for mounting

the reel on a suitable flat surface. Figure A shows the correct location of the

3 mounting holes on the base of the reel.

3 Using the three holes in the base, mount the reel in the desired location.

Be sure to use appropriate hardware to tighten securely.

4 Connect the end of the inlet hose assembly to the desired source of supply.

5 If you require a non standard water nozzle, the existing nozzle can be easily

replaced with the nozzle of your choice. Check connections for any leaks.

Also, check the WP1290 for correct operation. See the operation section as

below.

6 If you wish to adjust the position of the hose stop, loosen the hose stop bolts, slide the

stop to a position close to the hose guide assembly and retighten the bolts, unlatch the

reel, pull the hose from the reel and allow the reel to latch at the desired length.

Operation

1 Check your WP1290 large capacity water hose reel for correct operation by

slowly pulling out the hose. A clicking noise will be heard every half revolution

of the sheave assembly.

2 To latch the reel, pull the hose out and allow it to latch after hearing the first,

second or third "click".

3 To de-latch the reel, slowly pull out the hose until the clicking noises stop then

let the hose retract until the hose stop rests against the hose guide assembly.

Warnings & Safety Issues

To avoid damaging your WP1290 large capacity water hose reel, always hold onto

the hose while it is rewinding back on to the sheave assembly. Failure to do so will

void the manufacturer's warranty.

Also, periodically you will need to check the hose for wear and tear and check

the swivel fitting for any leaks. Immediate replacement of any worn, damaged or

leaking parts is required.

General

Thank you for choosing to buy and use the WP1290 Large Capacity Water Hose Reel supplied by Alemlube.

We trust that the WP1290 proves to be a reliable, time saving, cost saving and a productivity increasing piece of

equipment for you and your company.

NSW/ACT

QLD/PNG

TEL: (02) 9677 1555

TEL: (07) 3204 9166

FAX: (02) 9675 1155

FAX: (07) 3204 1224

OWNER'S TECHNICAL MANUAL

Large Capacity Water Hose Reel

Water

30 metres of 12mm ID hose

Plastic covers and sheave assembly, steel spring and pvc hose

15kg

Standard water nozzle and 3/4" BSP (f) inlet

60ºc

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9302 4199

TEL: (08) 8241 7111

FAX: (08) 9303 2095

FAX: (08) 8241 7011

www.alemlube.co.nz

WP1290

TEL: (64) 9 447 1007

FAX: (64) 9 447 1008