Andersen 400 Series Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Andersen 400 Series. Andersen 400 Series 6 pagina's. Lock mechanism
Ook voor Andersen 400 Series: Installatie- en verwijderingshandleiding (2 pagina's), Aanpassing (4 pagina's), Handleiding wijzigen (2 pagina's)
Pagina afdrukken
4. Attach Head Gusset Plate
• Place Head Gusset Plate on top of Head Jamb 3/4"
below Inside Trim Stop centering at mullion joint.
• Hold in place and secure with twenty-four (24)
1/2" staples or nails.
Windows and doors can be heavy. Use safe lifting
techniques and a reasonable number of people with
enough strength to lift, carry and install window
and door products to avoid injury and/or product
damage.
• Carefully turn joined units over, exterior side up.
Make sure all Sash are in the raised position
against the Head Jamb before shipment. Failure to
do so could result in product damage.
5. Seal Mullion Joint
• Seal head and sill end at mullion joints with
sealant as illustrated and tool smooth.
• Joined units are now ready for installation.
Follow installation guide packaged with unit for
window and drip cap installation.
Non-Reinforced Joining Guide (Vertical)
Inside Trim Stop
Head Gusset
Plate
Mullion Joint
Sealant
Vertical Exterior
Trim Strip
5
3/4"
1/2"
Staples or
Nails
Interior Sides Up
Exterior Sides Up
Head of Unit