ATL Berkshire 100 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ATL Berkshire 100. ATL Berkshire 100 4 pagina's.
Ook voor ATL Berkshire 100: Gebruikershandleiding (4 pagina's)

Pagina afdrukken

Preparing to use your

Berkshire 100

INITIAL CHECK

Our telephones are checked, tested and leave us

in perfect condition. If yours is damaged, please

return it to your supplier with proof of purchase, for

a replacement.

TELEPHONE NUMBER LABEL

The telephone incorporates a label underneath the

handset for recording frequently used telephone

numbers. To remove the plastic cover, operate the

release clip with your thumb nail and hinge upward.

CONNECTION

The Berkshire 100 telephone can be connected

either to a Direct Exchange Line, or as an extension

to a compatible company exchange (PABX).

HANDSET CORD

This cord will require connection between the

telephone and handset. Take any end of the handset

cord, locate the port marked 'HANDSET' on the left

hand side of the Berkshire 100 and simply push to

locate. Connect the other end to the base of the

handset to complete.

LINECORD

The Berkshire 100 arrives with a linecord for

connection to a standard BS6312 BT-socket. The

rear of the telephone has a port marked 'LINE', plug

your selected linecord into this port ﬁ rst and the

other end to your telephone line termination point.

RJ45 & RJ11 linecords are available as an option,

ask your supplier for details.

WALL AND DESK MOUNTING KITS

A wall or desk mounting kit is available as an option,

please contact your supplier for further information.

Receiving calls

Incoming calls will be announced by the audible

ringer and ﬂ ashing LED. To answer the call, simply

lift the handset.

Making calls

•

Pick up the handset and listen for dial tone

•

Dial the required telephone number

(Note: making external calls from a company

exchange (PABX) requires the number to be preﬁ xed

by an access digit, normally '9')

Features and Facilities

TRANSFER KEY (RECALL)

Berkshire 100 telephones are provided with a

'TRANSFER' key, required by modern public and

private exchanges, in order to gain access to

various features such as 'transferring a call'. For

this, the 2 position selector switch at the rear of the

telephone, must be set to the 'T' (Time Break Recall)

or 'E' (Earth Leg Recall) position, to suit your system

requirements.

REDIAL KEY

If you wish to redial the last number you dialled, you

can do so by lifting the handset and pressing the

'REDIAL' button.

MUTE KEY

The microphone in the handset can be turned off

(mute) in order for you to refer to a colleague without

your caller hearing you.

•

Pressing the 'MUTE' button turns off the

microphone and gives visual LED indication within

the 'MUTE' button.

•

Pressing the 'MUTE' button again turns the

microphone back on and the LED is turned off.